T6-FLEX-ALM is a flex table box with standard 3 prong Edison plug hard wired electric feed. Available in aluminum. Encased in one of elegant T6 table boxes the T6 Flex control system is a small, powerful and affordable solution perfect for nearly any installation. It features a 3.5” color LCD touchscreen and all of the connectivity needed to control the lighting, shades and every piece of AV equipment installed all from one central location. It features the full complement of serial, IR, GPIO and Ethernet ports and is the right choice for larger installations or where network connectivity is required. The interior compartment can be populated with a variety of AC and AV connector plates available from FSR. A Flex can also be remotely controlled using the Flex Remote Control software. The software connects to the Flex installed in the room and replicates screen on the desktop and is available for Windows 8®; Windows RT®; Windows Phone®; Android®, iPad® and iPhone®.
3.5" diagonal color LCD touch screen
N4 serial ports
4 IR ports (each can control up to 4 devices)
4 GPIO ports
IP port
Built in clock/calendar with scheduler
Multi command scripting conditionality
"Power over Ethernet capability"
Standard 3 prong Edison plug hard wired electric feed
Applications
K-12 classrooms
University lecture halls
Boardrooms
Meeting rooms
Conference rooms
ROHS Compliant - Yes
Systems Controlled - Lighting
Systems Controlled - Other
Spec Sheet available - Yes
Power:
Local adapter
Power supply included
Connector type: Screw terminal
I/O Ports:
Output: open collector, current limited to 100mA,(24VDC max) Input: VIH_MIN = 5VDC, VIH_MAX = 24VDC, VIL_MAX = 0.4VDC Connector type: Screw terminal
Ethernet Port:
Type: 10/100BASE T/X
Compliance and supported features:
Compliant with IEEE 802.3/802.3u (100BASE-TX)
Compliant with ISO 802-3 / IEEE 802.3 (10BASE-T)
Supports Auto-negotiation
Supports Automatic polarity detection and correction
Supports HP Auto MDI/MDI-X
(no crossover cables required)
Protocols TCP/IP, UDP
Connector type: RJ-45
Compliant with IEEE 802.3af (Class I device)
Support local power adapter OR-ing for redundancy
(local adapter preference)
Unit can be powered from an 802.3af compliant PoE
switch (not provided)
Unit can be powered from an 802.3af compliant PoE PSE
adapter (i.e. midspan injector. Not included
(optional accessory)