<style> .wpb_animate_when_almost_visible { opacity: 1; }</style> GL-EXP-DIMFLV-CN | 1-channel Green Light Dimmer Independent Expansion Module | Crestron Electronics, Inc. | ATR/Treehouse

About Us

Pro AV Catalog
Crestron Electronics, Inc. - GL-EXP-DIMFLV-CN
Request Quote
All Products
crestron-electronics

1-channel Green Light Dimmer Independent Expansion Module

Model: GL-EXP-DIMFLV-CN

Part #: 6507038

  • Single-channel 0-10 Volt lighting dimmer
  • Crestron® system integration via Cresnet®
  • Supports 0-10V dimmable fluorescent ballasts and LED drivers
  • Also supports on/off switching of non-dimmable lighting and motor loads
  • Built-in air gap relay
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

The Crestron Green Light® GL-EXP Series delivers a family of professional lighting control modules for Cresnet® or DALI® based lighting systems. Designed for easy installation on a wall or above a suspended ceiling, these modules offer a perfect solution for adding extra lighting zones to any system without requiring an additional lighting cabinet.

The GL-EXP-DIMFLV-CN is a single-channel dimmer expansion module designed to control 0-10 Volt dimmable fluorescent ballasts and LED drivers. It can also be used to switch non-dimmable lighting and motor loads.

Cresnet® Communications

The GL-EXP-DIMFLV-CN interfaces with a Crestron® control system via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.

Emergency Lighting Control

The GL-EXP-DIMFLV-CN is UL® 924 listed for use in controlling an emergency lighting load. In the event of a power failure, a contact closure from a power loss sensor (Crestron GLS-PLS-120/277) activates the override mode in the GL-EXP-DIMFLV-CN to turn on the lighting load if it is off (assuming line power is supplied by a backup power source). The override dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when override mode is activated.

Plenum Rated NEMA Enclosure

The GL-EXP-DIMFLV-CN is designed to be mounted to a vertical surface and is UL 2043 compliant to allow for installation in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.

  • Single-channel 0-10 Volt lighting dimmer
  • Crestron® system integration via Cresnet®
  • Supports 0-10V dimmable fluorescent ballasts and LED drivers
  • Also supports on/off switching of non-dimmable lighting and motor loads
  • Built-in air gap relay
  • Closure-activated override mode
  • UL® 924 listed for emergency lighting control
  • Surface mountable NEMA Type 1 enclosure
  • Mounts on a wall panel or above a suspended ceiling
  • UL 2043 listed for installation in an environmental air handling space
 
Request Quote