About Us
DM Lite 4K60 4:4:4 Receiver for HDMI, RS-232, and IR Signal Extension over CATx Cable
Model: HD-RXC-4KZ-101
Part #: 6511815
- Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher
- Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable
- DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- 4K60 4:4:4 capability
- HDR10, HDR10+, and Dolby Vision® video formats
The HD-RXC-4KZ-101 is a DM Lite® 4K60 4:4:4 receiver designed to interoperate with a DM Lite® transmitter or DMPS Lite™ switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable is used to connect the HD-RXC-4KZ-101 to the DM Lite transmitter or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.
Interoperability with a DM Lite Transmitter or DMPS Lite Switcher
The DM Lite input port of the HD-RXC-4KZ-101 must be connected to a DM Lite output port of a DM Lite transmitter or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD-TX-4KZ-101, HD-TX-4KZ-111, HD-TXA-4KZ-101, HD-TXC-4KZ-101, and HD-TXCA-4KZ-101. Supported DM Lite 4K60 4:2:0 transmitters are the HD-TX-101-C-E, HD-TXC-101-C-E, HD-TX-301-C-E, HD-TX-101-C-1G-E, HD-TXC-101-C-1G-E, and HD-TX-201-C-2G-E. Supported DMPS Lite switchers are the HD-PS622, HD-PS621, HD-PS402, and HD-PS401.
The HD-RXC-4KZ-101 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-RXC-4KZ-101. In addition, control system programming and .AV Framework™ software support of the HD-RXC-4KZ-101 is hosted by the switcher.
4K60 4:4:4 and HDR Support
The HD-RXC-4KZ-101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.
Compact, Surface-Mountable Design
Compact in design, the HD-RXC-4KZ-101 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-RXC-4KZ-101 can receive power from the included power pack or from the remote DM Lite transmitter or DMPS Lite switcher.
- Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher
- Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable
- DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- 4K60 4:4:4 capability
- HDR10, HDR10+, and Dolby Vision® video formats
- Compliance with HDCP 2.3
- CEC (Consumer Electronics Control) pass-through capability
- Bidirectional RS-232 and IR pass-through capability
- EDID pass-through capability
- Compact, surface-mountable design
- Power from 24VDC power pack (included) or from remote DM Lite transmitter or DMPS Lite switcher
- Receiver/Transmitter Cable Type - Other
- Receiver/Transmitter Format Type - HDMI
- Supported Resolution - 1080i (1920x1080)
- Supported Resolution - 1080p (1920x1080)
- Supported Resolution - WQXGA (2560x1600)
- Supported Resolution - Other
- Warranty - Yes
- Spec Sheet available - Yes
- DC Voltage: 24 Volts
- Certifications: CE, IC, FCC
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 2.50 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Transmission Range: 230 ft
- Depth: 1.08 in
- Height: 4.13 in
- Width: 4.18 in
- Product Weight: 0.74 lbs
- Video:
•Input Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
•Output Signal Type: HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support (DVI compatible)4
•Copy Protection: HDCP 2.3 - Audio:
•Input Signal Type: DM Lite
•Output Signal Type: HDMI
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels - COMMUNICATIONS:
•HDMI: HDCP 2.3, EDID, CEC pass-through
•DM Lite: HDCP 2.3, EDID pass-through
•RS-232: 2-way serial pass-through up to 115.2k baud (TD/RD only)
•IR: Bidirectional IR signal pass-through up to 60 kHz - Connectors:
•IR IN/OUT: (1) 4-pin 3.5 mm detachable terminal block; Comprised of (1) IR input port and (1) IR output port; IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Lite transmitter; IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the DM Lite transmitter; Supports IR up to 60 kHz
•COM: (1) 3-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Passes RS-232 TD/RD data to/from the COM port on a DM Lite transmitter; Supports up to 115.2k baud
•HDMI OUT: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•DM LITE IN: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher
•24V 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included - Controls and Indicators:
•LINK: (1) Green LED, indicates that a DM Lite link is established
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational
•HDMI OUT: (1) Green LED, indicates that the device is transmitting an HDMI signal
•DM LITE IN: (2) LEDs on RJ 45 connector. Green indicates that a DM Lite link is established, Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video - Humidity: 20% to 90% RH (non-condensing)
- Enclosure:
•Chassis: Metal, black finish, vented sides, 2 mounting brackets included
•Mounting: Freestanding, surface mountable, or attachment to a single rack rail
ATR/Treehouse
812 Charles Street
Providence, RI 02904
USA
401-751-3121
www.atrtreehouse.com