About Us
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Product Info
Tech Specs
Documents
IR+ system features with two emitters, bracket and ADA sign. This system features Dante. System Includes: IR M1 D infrared modulator with Dante (2) IR E4 emitter IDP 008 accessibility sign MLB 003 linking bar
- Dante Enabled - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Wireless Receiver Transmission - IR
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 16,000 Hz
- Maximum Frequency Response (Bandwidth): 16 kHz
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Certifications: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
- Color: Black
- Warranty (Length/Type): 2 Years
- IR M1:
•Dimensions: 19 (W) x 1.75 (H) x 8.2 inch (D) (48.3 cm x 4.5 cm x 20.8 cm)
•Weight: 5.2lb. (2.4 kg)
•Rack Mount: Single Rack Unit
•Power Supply: International Desktop Supply
•Input: 36 W, 110-240 VAC 50-60 Hz
•Output: +48VDC, 0.75A center-positive
•Power Switch: Rocker switch with LED
•Signal to Noise Ratio: 67 dB (typical)
•Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
•Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
•Frequency Response: 40 to 16,000Hz, +1 dB, -3dB, electrical response
•Total Harmonic Distortion: Less than 2%, electrical response
•Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
•Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
•Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
•Audio Input: (2x) Combination 3-pin XLR, 1/4 inch (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
•Dante: Optional
•Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
•Remote Configuration: Available through embedded website
•Headphone Output: (2) 1/4inch headphone jacks on front panel for monitoring CH A and CH B audio inputs
•Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission - IR E4:
•Dimensions: 7.5 (W) x 1.4 (H) x 3.6 inch (D) (19.1 cm x 3.6 cm x 9.1 cm)
•Weight: 0.8 lb (362 g)
•Power: 48 VDC supplied by IR M1 via CAT 5e cable
•Coverage Area: Up to 18,000 square feet in single channel mode
•Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1
MCAT-277-IR-M1.pdf
311795 kb
- Data Sheet
IRPlusFlyer_5_25_21.pdf
755961 kb
- Brochure
MAN-273_C-IR-M1.pdf
1552472 kb
- Instructions
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact ATR/Treehouse
close
ATR/Treehouse
812 Charles Street
Providence, RI 02904
USA
401-751-3121
www.atrtreehouse.com
Contact in regards to this product:
Williams AV
Model: IR ME2 D
Request more information from a dealer near you
close
Request more information from a dealer near you