About Us
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-channel 150W Multi-mode Power Amplifier
Series: NX
Model: nXe 1502
- Selectable 80Hz 2nd-order Hi-pass filter, limiter and input gain per channel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fan
- Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
- Serial data port available for Ashly WR-5 programmable remote control (optional RS-232 converter INA-1 available for third party controllers)
Product Info
Tech Specs
Documents
NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
All NXE Models Include:
Class-D Switching Amplifier Technology: NXE features a universal switch-mode power supply with Power Factor Correction (PFC) that operates from 70 to 270VAC.
Multi-Mode Operation: Selectable Outputs allow you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance (2, 4 and 8 Ohm), or 25, 70, or 100V Constant Voltage and you’re set to go.
Energy Efficiency: NXP has power-saving Ashly EMS™ (Energy Management System) which provides an automatic sleep-mode drawing less than 1W (defeatable).
Ethernet Control using Protea™ NE software: Also, serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante™, CobraNet™, or AES3 digital audio capability (factory-installed).
Real-Time Clock with Event Scheduler: Assign automatic execution of selected functions and tasks. The event scheduler is programmed from software and stored in the amplifier.
Ashly Remote Control via iPad® app: Use our free Ashly Remote app available for custom design of secure wireless control over network.
- Selectable 80Hz 2nd-order Hi-pass filter, limiter and input gain per channel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fan
- Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
- Serial data port available for Ashly WR-5 programmable remote control (optional RS-232 converter INA-1 available for third party controllers)
- Instant Standby Mode, 40% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
- Preset recall via contact closure, software control, remote control, or event scheduler
- Programmable power-on delay
- Aux preamp line outputs for driving other amplifiers
- Fault condition logic outputs per channel
- Euroblock input connectors
- Euroblock loudspeaker connectors
- Detachable AC mains line-cord connector
- Amplifier Type - Power Amplifier
- Dante Enabled - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 14.54 in
- Height: 1.75 in
- Impedance: 8 ohm
- Width: 19 in
- Shipping Weight: 14.80 lbs
- Power Handling: 150 Watt
- Product Weight: 11.90 lbs
- Warranty (Length/Type): 5 Year
- Certifications: CE, FCC
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 99 dB
- Number of Channels: 2
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Operating Temperature (Maximum): 120.20 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Minimum): 70 Volts
- AC Voltage (Maximum): 270 Volts
- Shipping Width (with packaging): 25.20 in
- Shipping Height (with packaging): 2.50 in
- Shipping Depth (with packaging): 19.50 in
- Max Output Power: Measured in Watts Per Channel, Low Impedance Output Mode, All Channels Driven at Rated Load:
•2 Ohms: 150
•4 Ohms: 150
•8 Ohms: 150 - Low Impedance Output Mode, Bridged Output: Measured in Watts, All Channels Driven at Rated Load:
•4 Ohms: 300
•8 Ohms: 300 - 25V, 70V, 100V Constant Voltage Output Mode: Measured in Watts, All Channels Driven at Rated Load:
•25V(per channel): 150
•70V (per channel): 150
•100V (per channel): 150 - Total AC Mains Power Draw: Measured in Watts, Typical input, all channels driven, 120VAC:
•Sleep Mode: less than 1
•Standby Mode: 15
•Idle (no signal): 33
•1/8 Max Power @ 2 Ohms: 133 - Current Draw: Measured in Amps, Typical Input, Total for all Channels, 120VAC, Divide by 2 for 240VAC:
•Sleep Mode: 94mA
•Standby Mode; 0.27
•Idle (no input signal): 0.35
•1/8 Max Power @ 2 Ohms: 1.16 - Thermal Dissipation: BTU/hr, Typical Input, Total for all Channels:
•Sleep mode: 2.14
•Standby mode: 51
•Idle (no input signal): 112
•1/8 Max Power @ 2 Ohms: 325 - VOLTAGE GAIN: Selectable at 26dB, 32dB, 38dB, or 1.4V
- Damping Factor: greater than 250 (8 Ohm load <1kHz)
- Input High Pass Filter: 80Hz 2nd order
- Channel Separation: -75dB (dB from full output, 1kHz)
- Balanced Input Connector: Euroblock 3.5mm
- INPUT IMPEDANCE: 10k Ohms
- Maximum Input Level: +21dBu
- Speaker Output Connector: Euroblock 7.62mm
- Control Network: RJ-45 connector, 100MB Ethernet
- AUX Output Connector: Balanced Euroblock 3.5mm
- AUX Output Maximum Level: +21dBu
- Remote Standby Contact Closure: Euroblock 3.5mm, close contact pin ground (G) for standby mode
- Data connection: Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
- Fault Condition Logic Outputs: Euroblock 3.5mm - fault indicated by loss of 1Hz "heartbeat" pulse signal
- Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
- Attenuators (per channel): Rear panel, software, offset link group, remote control. Fully off = Mute
- Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
- Cooling: Continuously variable temperature controlled fan
- Power Requirements (@ 50/60Hz):
•Nominal Voltage Input: 120VAC - 240VAC
•Minimum power-up: 70VAC
•Power Supply Type: SMPS with active PFC Power Factor Correction)
•AC Mains Line Cord Connector: Detachable Nema 5-15 for USA (May vary for export) - Front Panel LED Indicators:
•POWER (white): Switch: On, Off, Standby (flashing)
•PROTECT (red): On (fault condition or shut down), Off
•SLEEP (blue): On, amplifier is asleep from audio inactivity
•DISABLE (yellow): On, power switch & attenuators are disabled
•COM (green): On, for Ethernet data or Device ID
•Per Channel:
•CLIP/MUTE (red): Clip @ 1dB below rated output / Mute
•SIGNAL (green): 18dB below rated output
•CURRENT (green): Brightness is proportional to output current
•TEMP (yellow): On dim at 90% max operating temperature, On full bright + protect at 100%
•BRIDGE (green): Per Channel Pair, On, Off - Remote Accessories:
•WR-1: 2-Channel Level Control
•WR-1.5: Level and Preset Recall
•WR-2: Four-Position Preset Recall Switch
•WR-5: Programmable Button Controller
•neWR-5: Programmable Network Button Controller
•Ashly Remote: Remote Control Application for Apple® iPad®, iPhone®, and iPod Touch®
Multi-mode Power Amplifier
810090 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact ATR/Treehouse
close
ATR/Treehouse
812 Charles Street
Providence, RI 02904
USA
401-751-3121
www.atrtreehouse.com
Contact in regards to this product:
Ashly Audio, Inc.
Model: nXe 1502
Request more information from a dealer near you
close
Request more information from a dealer near you