About Us
Audio CDi DriveCore 2|300 2 Channel Analog Input Amplifier
Model: GCDI2x300-U-US
- DriveCore Technology - Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
- Network Control and Monitoring - Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
- DSP - On-board Digital Signal Processor in each amplifier allows for custom configuration
- Input Router:
- Input Delay - Up to 1000ms
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2|300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
- DriveCore Technology - Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
- Network Control and Monitoring - Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
- DSP - On-board Digital Signal Processor in each amplifier allows for custom configuration
- Input Router:
- Input Delay - Up to 1000ms
- Input Parametric EQ - 8 band
- Crossover
- Output Parametric EQ - 8 band
- Output Delay - Up to 100ms
- LevelMAX™ Limiter
- BLU link (BL models only) - Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
- Direct Drive 70/100Vrms Output - Each output channel is capable of provide either 70V or 100V for high impedance applications.
- Front-Panel Interface - Completely configure the amplifier using an intuitive front-panel interface.
- GPIO/AUX Port - Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 8 ohm
- Number of Channels: 2
- Number of Watts Per Channel: 300 Watt
- Depth: 12.25 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 14.56 lbs
- Color: Black
Suggested Products
ATR/Treehouse
812 Charles Street
Providence, RI 02904
USA
401-751-3121
www.atrtreehouse.com