Wall panel control for DMM8008

Model: WP8008

"Set" key used to access the various menu and to confirm
"Esc" button is used to exit from the menu below
"EncButton" button associated with the relative encoder used to enter and exit the standby
mode if the key is pressed for about 5-6 sec. Or with the single pressure allows the setting of
the step when the system is on the menu for changing the values of Gain and Volume (Gain=-127dB to + 12dB, Volume =-127dB to + 18dB)

Compare

Project List

Product Info

Tech Specs

The WP8008 is Wall Panel Control module for the DMM 8008 Matrix System. Connection type RS-485.

"Set" key used to access the various menu and to confirm
"Esc" button is used to exit from the menu below
"EncButton" button associated with the relative encoder used to enter and exit the standby
mode if the key is pressed for about 5-6 sec. Or with the single pressure allows the setting of
the step when the system is on the menu for changing the values of Gain and Volume (Gain=-127dB to + 12dB, Volume =-127dB to + 18dB)
Relative Encoder used to move between the various menu and change the value of the parameters.
LCD display 2 x 20 alphanumeric
Power ON Led: when lit indicates that the system is powered
Eth Led when lit indicates that the WP is communicating with the DMM8008

by LynTec

by LynTec

by LynTec