<style> .wpb_animate_when_almost_visible { opacity: 1; }</style> KDS-8 | Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Copper | Kramer Electronics USA, Inc. | ATR/Treehouse

About Us

Pro AV Catalog
Request Quote
All Products

Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Copper

Model: KDS-8

Part #: 59-001890

  • High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
  • Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms.
  • HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
  • High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave.
  • Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal.
Compare
Project List
Product Info
Tech Specs
Documents

KDS-8 is a high-performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. KDS-8 can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI input along with IR, RS-232, and analog audio, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.

  • High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
  • Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms.
  • HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
  • High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave.
  • Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal.
  • Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa.
  • Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa.
  • Video Wall Support.
  • Multiview Support
  • Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting.
  • Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.
 
Request Quote
 

Suggested Products