The D-HA1A is a audio headphone amplifier compatible with RDL Format-A twisted pair products. Each D-HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender. The left and right audio signals received on pairs B and C of the twisted pair cable are amplified and fed to the left and right channels of the output 3.5 mm Mini-jack. The D-HA1A is ideally suited to guest room installations with bedside and restroom listening stations.
Headphone Amplifier with User Level Control
Output on Standard Mini Jack
Mounts in a Wall or Cabinet
Input and Power Connection on RJ45
Connects to Format-A Sender using Twisted-Pair Cable
Powered from RDL Twisted Pair Format-A Sender
RJ45 Loop-Thru for Connecting Additional Modules
Protected by Automatically Resetting Fuse
Decora Design with All Steel Panel and Rear Enclosure
Amplifier Type - Headphone Amplifier
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
40 kHz
Maximum Frequency Response (Bandwidth):
40000 Hz
Minimum Frequency Response (Bandwidth):
10 Hz
Minimum Frequency Response (Bandwidth):
0.01 kHz
Certifications:
CE
Total Harmonic Distortion + Noise (THD+N):
0.01 %
Current Draw:
0.03 Amps
DC Voltage:
24 Volts
Depth:
1.55 in
Height:
1.72 in
Width:
4.11 in
Noise:
-90 dB
Shipping Weight:
0.40 lbs
DB-HA1A
- Format-A Stereo Headphone Amplifier with Decora Design
DS-HA1A
- Format-A Stereo Headphone Amplifier with User Level Control
RU-NFD
- Network to Format-A Interface/Distributor
RU-NFDP
- Network to Format-A Interface/Distributor with PoE
TX-TPSA1A
- Three-Pair Combiner to Single-Pair Sender