The D/S-AVM4 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel. The front panel features a pass-through video monitor connector. Video connections are made on the front and rear panel using a standard dB15 video connector. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for stereo consumer line level audio sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.
Stereo Audio Inputs to Stereo Audio Output
Stereo Inputs on RCA Jacks and Stereo Mini-Jack
Unbalanced Output on Detachable Terminal Block
Video Monitor Pass-Through Panel Connector
Available in Stainless Steel
Depth:
1.80 in
Height:
4.13 in
Width:
1.30 in
Shipping Weight:
0.15 lbs
Audio input connectors (3):
RCA jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
Video Input Connector:
Female DB15
Audio Output Connector:
Detachable terminal block (Left and Right unbalanced audio)
Video Output Connector:
Female DB15 (pass-through from front panel)
Mounting Box Minimum Depth:
0.15 in. plus the depth of the installer-provided video connector