The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines. The D/S-CIJ3D is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The inputs are balanced through audio transformers configured to reject induced hum. A stereo line-level output is provided on the rear-panel detachable terminal block for connection to 10 kohm or higher input impedance line-level module or equipment inputs.
Stereo Inputs to Stereo Outputs
Stereo Inputs on RCA Jacks and Stereo Mini-Jack
Unbalanced to Balanced Conversion Without Gain
Transformer Isolation for Unbalanced Line Inputs
Hum Cancellation on Unbalanced Line Inputs
Line-Level Output to Feed 10 kΩ Equipment Input
Output Connections on Detachable Terminal Block
Available in RDL White/Gray (D-CIJ3D)
Available in Stainless Steel (DS-CIJ3D)
Depth:
2.15 in
Height:
4.13 in
Width:
1.70 in
Shipping Weight:
0.45 lbs
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
32 F
Input Connectors (3):
Phono jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
Frequency Response (line level):
50 Hz to 20 kHz (±1 dB); 30 Hz to 20 kHz (±2 dB)
THD:
<0.2% (1 kHz)
Output Connector:
Detachable terminal block
Mounting Box Minimum Width Dimension:
1.80 in.
Mounting Box Minimum Depth Dimension:
1.75 in.
Crosstalk:
<-80 dB (1 kHz); <-60 dB (10 Hz to 20 kHz)