<style> .wpb_animate_when_almost_visible { opacity: 1; }</style> TX-MX2R | Audio Mixer / Distribution Amplifier | RDL, Radio Design Labs | ATR/Treehouse

About Us

Pro AV Catalog
RDL, Radio Design Labs - TX-MX2R
Request Quote
All Products

Audio Mixer / Distribution Amplifier

Series:

Model: TX-MX2R

  • Mix 2 unbalanced mono signals
  • Combine stereo into mono
  • Gain trim for each input
  • Two active isolated outputs from the input signal (s)
  • Isolation between inputs
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
The TX-MX2R is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed either one or two unbalanced destinations. The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. Each output from the TX-MX2R is a mono mix of the stereo signal. Normally, the gain trimmers are set to unity gain. If either channel is low, the gain of that channel may be adjusted up to 6 dB. The TX-MX2R may also be used to mix two separate sources into a single output. The mixing circuit in the module is an active summing amplifier. The output driver provides two separate, identical output signals from the input signal or signals. This output distribution amplifier therefore allows the TX-MX2R to be used as a two-output audio distribution amplifier. If it is desired to distribute a single source to two destinations, one of the inputs may be left unused without any loss of performance.
  • Mix 2 unbalanced mono signals
  • Combine stereo into mono
  • Gain trim for each input
  • Two active isolated outputs from the input signal (s)
  • Isolation between inputs
  • High-Quality unbalanced audio
 
Request Quote
 

Suggested Products